Name: Nano Energizer Nano Ceramic Coating for Car Engine
SKU: NANOENERGIZER_A30
Availability: InStock

Nano Energizer Nano Ceramic Coating for Car Engine

$30.00 – $55.00

Introducing Nano Energizer – Engine Ceramic Coating

A Revolutionary 20 nanometer nano ceramic coating tecnology for easy engine restoration without disassembling.

A unique & revolutionary technology in the world, Nano Energizer is a perfect creation from using Ceramic plus Metallic Coating Technology. The 20nm nano Ceramic layer contains platinum coated Zirconium power emulsified in mineral oil which is ideal for engine restoration and protection.

The results – smoother, more power and better mileage than ever before. Proven and No side effects!

Nano Energizer is perfect for saving fuel on all types of Gasoline and Diesel Engines.

Cars, Trucks, High performance vehicles, Motorbikes, Tractors, Heavy industrial machinery, Lawnmowers, Large boats, Compressors, Bearings, Gear Box, Transmission Case & power steering , Various Types of Industrial Equipment.

The Nano Energizer uses Revolutionary & Patented Nano Ceramic Technology It allows for easy Treatment of Engines and Restores, Repairs & Protects. This is not just another oil additive.

This formula only uses the oil as a medium to get into the engine. It is very soon extracted back out of the oil on the engine wall. Amazing technology!!

How does it work?

By applying Nano Energizer you are giving the engine a ceramic platinum coating.

With this coating the efficiency of an Internal Combustion Engine can be increased.
Higher efficiency of the engine is reflected in improved performance such as:

Fuel savings up to 8-21% (up to 40% in idle mode)
5 times lowered noise and vibration levels
Increased engine power output up to 100%
Restores friction surfaces and protects against wear
100 times reduction of the friction coefficient
Increased oil pressure & great combustibility
Reduced air pollution (3-9 times reduction in CO and CH in the exhaust)

The ceramic material used for the engine coating needs to have a low thermal conductivity and a high temperature stability, matched with thermal expansion which then bonds with the metal of the engine.

Nano Energizer forms a durable bond with engine’s metal adding a high wear resistance and also corrosion resistance

SKU: NANOENERGIZER_A30 Category: Nano Energizer

Description

Nano Energizer recommended for all vehicles after at least 3,000 km of use. for any type of engine using mineral or synthetic oil petrol, diesel or LPG.

Shake Nano Energizer enough before injection, as subsidence may occur after long storage

Frequently Asked Questions

Q1. How do I use Nano Energizer?
Ans:

Step 1. Shake vigorously & “massage” the pack of Nano Energizer for at least a good 15-30 seconds.

Step 2. Pour the Nano Energizer into the ENGINE OIL FILTER PORT

Step 3. Warm up the engine/drive the vehicle everyday for at least a week for at least 5-10 minutes (for drivers who seldom drive).

Note: It is not recommended to use Nano Energizer if the vehicle is due for servicing within 5,000km. The best effects can be seen if applied the Nano Energizer after engine flush and oil change.

For low mileage/new vehicles, Nano Energizer will not have much visible effects but it will form a protective layer inside the engine, protecting the engine interior.

Q2. How many pack of Nano Energizer do I need for my car?
Ans:
2 packs of Nano Energizer will be recommended for Engines larger than 2,000cc
1 pack of Nano Energizer will be recommended for Engines from 600cc to less than 2,000cc

For first time users, a re-application will be recommended after 4 to 5 months upon first application has been done for best effect.

Q3. Do I need to do a re-application with each oil change/servicing?
Ans:
No, once nano energizer has completed its coating cycle (approximately 1500 km) you can replace the oil.
Always follow engine manufactures oil requirements and changes. Reapplying nano energizer every 30,000 -40,000 km
to maintain optimum benefits.

For first time users, a re-application will be recommended after 4 to 5 months upon first application has been done for best effect.

Q4. When do I need Nano Energizer again?
Ans: Reapplying nano energizer at least every 30,000 – 40,000 km to maintain optimum benefits.

Additional information

Engine Type	600cc to less than 2,000cc Engine (1 Pack), More than 2,000cc Engine (Bundle of 2 packs)

Reviews

There are no reviews yet.

Be the first to review “Nano Energizer Nano Ceramic Coating for Car Engine”

You must be logged in to post a review.