Spray Painting with Glasurit® - from $4,000
EA Detailer is in technical partnership with Glasurit – the world’s leading automotive refinish manufacturer. From panel beating to spray painting to customised restoration refinishing. We provide professional & friendly services throughout Singapore.
The Glasurit® brand has long been considered a worldwide standard for excellence — it continues to deliver the productivity and quality demanded by leading collision repair centers and their customers. Glasurit is the best refinish choice available, and we back that up with VisionPlus Warranty Program, which will guarantee that your repair will always look as good as new.
Our process is audited by Glasurit and adhere strictly to their recommended protocols; all full respray job will be completed with Sonax CC36 Ceramic Coating.
what will be done
Make sure your paint job does not accentuate any imperfections – fix any visible dents, repair any rust, and remove chrome or plastic trim. Moldings and trim can be replaced after painting is complete.
Give your paint a smooth and even surface onto which it can adhere – sand your entire vehicle using circular motions, either all the way to the bare metal, to the original primer, or at least enough for your new coat of paint to adhere to
Using a cloth and denatured alcohol or mineral spirits, wipe down all surfaces of your vehicle thoroughly, to remove any oil residue and ready it for painting.
Use masking tape and overspray protective film to cover the surfaces of your vehicle that you don’t want painted, including mirrors, window trim, glass, grills and door handles.
Making sure to prime these properly by feathering them until they are smooth and applying enough primer to the areas. Allow all primer to cure thoroughly
Sand the newly primed surfaces once more.
Wipe the primed surfaces with a cloth slightly dampened with thinner.
Using a side-to-side sweeping motion, apply paint in thin and even coats. Typically, it will take three to four coats to completely cover the surface.
Apply Glasurit Clear Coat, using the same painting technique.
Remove masking tape while the clear coat is still wet, then allow the clear coat to dry.
Encapsulating your refreshed paint work withSonax CC36 Ceramic Coating; this dual phases coating creates a nanostructured particles deriving from a colloid precursor ensuring your vehicle is sheathed in a thin layer of membranic protection against environment hazard.
Solid car paint colors are those which do not contain a pearl or metallic sparkling agent. There are literally thousands of solid colors on the market. Solid car paint colors are suitable for complete coverage or in graphic effects on a wide variety of objects.
Pearl / Metallic car paint colors have been widely used in the automotive industry for more than 70 years and we have some of the hottest, new pearl / metallic colors and coolest, colors available. Pearl / Metallic car paint colors vary widely in color, and sparkle effect, offering a broad range of colors to suit most car paint enthusiasts. If you’ve been looking for high-quality, custom pearlescent / metallic auto paint, then we most likely have a color you’ll like.
Using multiple layers will create a finish that is so deep in tone it almost looks wet. This “wet look” appeals to many auto enthusiasts even more than the final color itself does. When candy colors combine with clear coats and reflective basecoats (usually metallic ones), they create a rich, impressive sparkle that the average automotive paint simply cannot produce.
The biggest fashion in cars over the past few years has been matte / frozen paint – a look that gives a sinister, half-finished look, as if the builders only paint resource was rattle cans of flat primer. Yet automakers haven’t dared offered such a paint on a mass-market car, because despite its tough appearance, matte finishes can take wicked amounts of upkeep. Leave it to EA Detailer to boldly go where other fear to tread by offering a matte/ frozen paint as an option on your loved car.